Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Gateway IP Address
Metric
Fields in the menu Extended Route Parameters
Field
Description
Source Interface
Source IP Address/
Netmask
Layer 4 Protocol
Source Port
Description
When Route Type =
Also enter the relevant netmask in the second field.
Only for Route Type =
or
Enter the IP address of the gateway to which your device is to
forward the IP packets.
Select the priority of the route.
The lower the value, the higher the priority of the route.
Value range from
to
. The default value is .
Description
Enter a description for the IP route.
Select the interface over which the data packets are to reach
the device.
The default value is
Enter the IP address and netmask of the source host or source
network.
Select a protocol.
Possible values:
,
,
,
.
The default value is
.
Only for Layer 4 Protocol =
Enter the source port.
First select the port number range.
Possible values:
•
(default value): The route is valid for all port numbers.
.
,
,
,
,
,
or
11 Networking
,
,
,
205
Hide quick links:
Advertisement
Table of Contents
