BinTec RS120 Reference Manual page 199

bintec elmeg GmbH
bintec RS Series
Field
Min. Period Passive
Scan
Max. Period Passive
Scan
RTS Threshold
Short Guard Interval
Short Retry Limit
Long Retry Limit
Description
Displays the minimum passive scanning time for a frequency in
milliseconds.
The value can only be modified for Roaming Profile =
. The default value is
Displays the maximum passive scanning time for a frequency in
milliseconds.
The value can only be modified for Roaming Profile =
. The default value is
Select how the RTS/CTS mechanism is to be switched on/off.
If you choose
the data packet length threshold in bytes (1 - 2346) as of which
the RTS/CTS mechanism is to be used. This makes sense if
several clients that are not in each other's wireless range are
run in one access point. The mechanism can also be switched
on/off independently of the data packet length by selecting the
value or.
Enable this function to reduce the guard interval (= time
between transmission of two data symbols) from 800 ns to 400
ns.
Enter the maximum number of attempts to send a frame. This
value must be less than or equal to the value specified in RTS
Threshold. After this many failed attempts, the packet is dis-
carded.
Possible values are to
The default value is .
Enter the maximum number of attempts to send a data packet.
This value must be longer than the value specified in RTS
Threshold. After this many failed attempts, the packet is dis-
carded.
Possible values are to
The default value is .
.
.
, you can specify in the input field
(default value).
.
.
10 Wireless LAN
185