Table of Contents
Advertisement
8 Physical Interfaces
140
Physical Interfaces
Fig. 61:
The menu Physical Interfaces->Ethernet Ports->Port Configuration consists of the fol-
lowing fields:
Fields in the Switch Configuration menu.
Field
Switch Port
Ethernet Interface Se-
lection
Configured Speed /
Mode
Ethernet Ports
Port Configuration
->
->
Description
Shows the respective switch port. The numbering corresponds
to the numbering of the Ethernet ports on the back of the
device.
Switch-Port 5: Port ETH5 is configured here (connection option
for an SFP module only available for bintec RS120 / bintec
RS120wu).
Assign a logical Ethernet interface to the switch port.
You can select from five interfaces,
sic setting, switch ports 1-4 are assigned to interface
and switch port 5 is assigned to interface
Select the mode in which the interface is to run.
Possible values:
•
•
•
•
•
bintec elmeg GmbH
to
. In the ba-
(default value)
bintec RS Series
Hide quick links:
Advertisement
Table of Contents
