BinTec RS120 Reference Manual page 217

bintec elmeg GmbH
bintec RS Series
fields:
Fields in the menu Basic Parameters
Field
Route Type
Description
Select the type of route.
Possible values:
•
terface which is to be used if no other suitable route is avail-
able.
•
way which is to be used if no other suitable route is available.
•
via a specific interface.
•
a specific gateway.
•
a network via a specific interface.
•
specific gateway.
Only for interfaces that are operated in DHCP client mode:
Even if an interface is configured for DHCP client mode, routes
can still be configured for data traffic via that interface. The set-
tings received from the DHCP server are then copied, along
with those configured here, to the active routing table. This en-
ables, e. g., in the case of dynamically changing gateway ad-
dresses, particular routes to be maintained, or routes with differ-
ent metrics (i. e. of differing priority) to be specified. However, if
the DHCP server sends static routes, the settings configured
here are not copied to the routing.
•
formation is taken entirely from the DHCP server. Only ad-
vanced parameters can be additionally configured. This route
remains unchanged by other routes created for this interface
and is copied to the routing table in parallel with them.
•
by DHCP are supplemented by routing information about a
particular host.
•
: Route via a specific in-
: Route via a specific gate-
: Route to an individual host
: Route to an individual host via
(default value): Route to
: Route to a network via a
: The routing in-
: The settings received
: The settings re-
11 Networking
203