Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
You do not need any additional software on your PC to set up a Telnet connection to your
device: Telnet is available on all operating systems.
Proceed as follows:
Windows
(1) Click Run... in the Windows Start menu.
(2) Enter
(3) Click OK.
A window with the login prompt appears. You are now in the SNMP shell of your
device.
(4) Continue with
Logging in for Configuration
Unix
You can also set up a Telnet connection on UNIX and Linux without any problem:
(1) Enter
A window with the login prompt appears. You are now in the SNMP shell of your
device.
(2) Continue with
Logging in for Configuration
5.1.1.3 SSH
In addition to the unencrypted and potentially viewable Telnet session, you can also con-
nect to your device via an SSH connection. This is encrypted, so all the remote mainten-
ance options can be carried out securely.
The following preconditions must be met in order to connect to the device via SSH:
• The encryption keys needed for the process must be available on the device.
• An SSH client must be installed on your PC.
Encryption keys
First of all, make sure that the keys for encrypting the connection are available on your
device:
(1) Log in to one of the types already available on your device (e.g. via Telnet - for login
see
Login
on page 65).
(2) Enter
for the input prompt. You are now in the Flash Management shell.
(3) Call up a list of all the files saved on the device:
If you see a display like the one below, the keys needed are already there and you can
5 Access and configuration
.
on page 66.
in a terminal.
on page 66.
.
61
Hide quick links:
Advertisement
Table of Contents
