BinTec RS120 Reference Manual page 164

8 Physical Interfaces
150
Field
Fields in the Current Line Speed menu.
Field
Downstream
Upstream
Fields in the DSL Parameter menu.
Field
DSL Mode
Description
•
•
•
•
Description
Displays the data rate in the receive direction (direction from
CO/DSLAM to CPE/router) in bits per second.
The value cannot be changed.
Displays the data rate in the send direction (direction from CPE/
router to CO/DSLAM) in bits per second.
The value cannot be changed.
Description
Select the ADSL synchronization type.
Possible values:
• (default value): The ADSL mode is auto-
matically adapted for the remote terminal.
• :ADSL1 / G.DMT is used.
• : ADSL2 / G.992.3 is used.
• : ADSL2 Plus / G.992.5 is used.
•
SL mode is automatically adapted to the other end with refer-
ence to G.992.3 Annex M.
•
Plus / G.992.3 Annex M is used.
• : Only for Annex J devices. ADSL2 Plus /
G.992.3 Annex J is used.
• : Only for Annex J devices. ADSL2 Plus /
G.992.5 Annex J is used.
• : The ADSL interface is not active.
bintec elmeg GmbH
: Only for Annex A devices. The AD-
: Only for Annex A devices. ADSL2
bintec RS Series