BinTec RS120 Reference Manual page 113

bintec elmeg GmbH
bintec RS Series
System Management
Fig. 42:
The System Management->Interface Mode / Bridge Groups->Interfaces->Add menu
consists of the following fields:
Fields in the Interfaces menu.
Field
Interface
Edit for devices the WIxxxxn and RS series
For WLAN clients in bridge mode (so-called MAC Bridge) you can also edit additional set-
tings via the icon.
System Management
Fig. 43:
You can realise bridging for devices behind access clients with the MAC Bridge function. In
wildcard mode you cannot define how Unicast non-IP frames or non-ARP frames are pro-
cessed. To use the MAC bridge function, you must carry out configuration steps in several
menus.
(1) Select GUI menu Wireless LAN->WLAN->Radio Settings and click the icon to modi-
fy an entry.
(2) Select Operation Mode =
(3) Select the System Management->Interface Mode / Bridge Groups->Interfaces
menu. The additional interface sta1-0 is displayed.
(4) For interface sta1-0 select Mode / Bridge Group =
figuration Interface=
(5) Click the Save configuration button to save all of the configuration settings. You can
Interface Mode / Bridge Groups
->
Description
Select the interface whose status should be changed.
Interface Mode / Bridge Groups
->
and save the settings with OK.
and save the settings with OK.
7 System Management
Interfaces Add
-> ->
Interfaces Add
-> ->
and Con-
99