BinTec RS120 Reference Manual page 515

bintec elmeg GmbH
bintec RS Series
Monitoring IPSec
Fig. 200: ->
Values in the IPSec Tunnels list
Field
Description
Local IP Address
Remote IP Address
Local ID
Remote ID
Negotiation Type
Authentication Method Shows the authentication method.
MTU
Alive Check
NAT Detection
Local Port
Remote Port
Packets
Bytes
Errors
IKE (Phase-1) SAs (x)
IPSec Tunnels
-> ->
Description
Shows the description of the peer.
Shows the WAN IP address of your device.
Shows the WAN IP address of the connection partner.
Shows the ID of your device for this IPSec tunnel.
Shows the ID of the peer.
Shows the exchange type.
Shows the current MTU (Maximum Transfer Unit).
Shows the method for checking that the peer is reachable.
Displays the NAT detection method.
Shows the local port.
Shows the remote port.
Shows the total number of incoming and outgoing packets.
Shows the total number of incoming and outgoing bytes.
Shows the total number of errors.
The parameters of the IKE (Phase 1) SAs are displayed here.
21 Monitoring
501