Table of Contents
Advertisement
18 Local Services
462
Field
Connection State
Destination IP Ad-
dress/Netmask
Destination Port/Range Only for Protocol =
Source IP Address/
Netmask
Source Port/Range
Description
Select the type.
Possible values:
,
,
,
,
See RFC 792.
The default value is
.
With Protocol =
, you can define a filter that takes the
status of the TCP connections into account.
Possible values:
•
: All TCP packets that would not open any new
TCP connection on routing over the gateway match the filter.
•
(default value): All TCP packets match the filter.
Enter the destination IP address of the data packets and the
corresponding netmask.
or
Enter a destination port number or a range of destination port
numbers.
Possible values:
•
(default value): The destination port is not specified.
•
: Enter a destination port.
•
Enter the source IP address of the data packets and the corres-
ponding netmask.
Only for Protocol =
or
Enter a source port number or a range of source port numbers.
Possible values:
•
(default value): The destination port is not specified.
•
: Enter a destination port.
•
bintec elmeg GmbH
,
,
,
.
: Enter a destination port range.
: Enter a destination port range.
,
bintec RS Series
Hide quick links:
Advertisement
Table of Contents
