Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
User Name
Password
Always on
Connection Idle
Timeout
Fields in the IP Mode and Routes menu.
Field
IP Address Mode
Default Route
Description
When using the internal DSL modem, select here the EthoA in-
terface configured in Physical
Interfaces->ATM->Profiles->New, e.g.
Enter the user name.
Enter the password.
Select whether the interface should always be activated.
The function is enabled with
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Only if Always on is disabled.
Enter the idle interval in seconds. This determines how many
seconds should pass between sending the last traffic data pack-
et and clearing the connection.
Possible values are
to
timeout.
The default value is
.
Example:
for FTP transmission,
sion,
for Internet connections.
Description
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically.
Possible values:
•
(default value): Your device is automatic-
ally assigned a temporarily valid IP address from the provider.
•
: You enter a static IP address.
Select whether the route to this connection partner is to be
.
.
(seconds).
deactivates the
for LAN-to-LAN transmis-
14 WAN
279
Hide quick links:
Advertisement
Table of Contents
