11 Networking
214
Field
Action
Protocol
Description
•
Only for Type of traffic =
Select which data packets are to be excluded by NAT.
Possible values:
•
(default value): All the data packets that match the
following parameters that are to be configured (protocol,
source IP address/network mask, destination IP address/net-
mask, etc.) are excluded by NAT.
•
: All the data packets that do not match the
following parameters that are to be configured (protocol,
source IP address/network mask, destination IP address/net-
mask, etc.) are excluded by NAT.
Only for certain services.
Not for Type of traffic =
method =
,
. In this case UDP is automatically defined.
Select a protocol. According to the selected Service, different
protocols are available.
Possible values:
•
(default value)
•
•
•
•
•
•
•
•
•
•
•
•
bintec elmeg GmbH
and NAT
or
bintec RS Series