Table of Contents
Advertisement
bintec elmeg GmbH
bintec RS Series
Field
Current Speed / Mode
Flow Control
To use port ETH5 with an SFP module, you can activate the following settings in this menu
for Switch Port :
Fields in the Switch Configuration for Switch Port 5 in SFP Mode menu
Field
Ethernet Interface Se-
lection
Description
•
•
•
•
•
•
•
•
•
: The interface is created but remains inactive.
Shows the actual mode and actual speed of the interface.
Possible values:
•
•
•
•
•
•
Select whether a flow control should be conducted on the cor-
responding interface.
Possible values:
•
(default value): No flow control is performed.
•
: Flow control is performed.
•
: Automatic flow control is performed.
Description
Assign a desired logical Ethernet interface to the switch port.
You can select from five interfaces,
8 Physical Interfaces
to
. In the ex
141
Hide quick links:
Advertisement
Table of Contents
