BinTec RS120 Reference Manual page 478

18 Local Services
464
Local Services
Fig. 180: ->
The Local Services->Wake-On-LAN->WOL Rules->New menu consists of the following
fields:
Fields in the menu Basic Parameters
Field
Wake-On-LAN Rule
Chain
Description
Wake-On-LAN Filter
Wake-On-LAN WOL Rules
->
Description
Select whether to create a new rule chain or to edit an existing
one.
Possible values:
• (default value): You can create a new rule chain with this
setting.
•
already been created, which you can select and edit.
Only where Wake-On-LAN Rule Chain =
Enter the name of the rule chain.
Select a WOL filter.
If the rule chain is new, select the filter to be set at the first point
of the rule chain.
If the rule chain already exists, select the filter to be attached to
the rule chain.
To select a filter, at least one filter must be configured in the
bintec elmeg GmbH
New
->
: Shows a rule chain that has
bintec RS Series