Printronix T5204R Administrator's Manual page 85

MEDIA
CONTROL
(page 107)
Print Intensity
Gap/Mark Sensor
Print Speed
Auto Calibrate
3
Print Mode
Media Profile
Media Handling
Sensed Distance
Paper Feed Shift
Gap/Mark Thresh
Label Length
Paper Out Thresh
Label Width
Paper Out Sensor
Ver Image Shift
Manual Calibrate
Hor Image Shift
Pwr Up Action
Orientation
HeadClose Action
Auto Map Select
Online Auto-Cal
Auto Label Width
Gap Windowing
Num Auto Labels
Gap Length
Slew Speed
Cal in Peel Mode
Print Direction
Min Calib Delta
Label Wait Time
Use Label Length
Pre-Peel Mode
Threshold Range
Pre-Peel Adjust
Lbl Missing Flt
Clip Page
Error Recover
3
Ribbon Width
3
Display Ribbon
3
Ribbon Low
3
Rbn Takeup Full
Units
Set Label Length
Peel Present
Peel-Off Mode
Continuous Mode
TOF Detect Fault
Ticket Save Mode
TOF Adjust Mode
TOF Adjust
3
Ribbon Calibrate
Reverse Speed
Vertical DPI Adj
NOTES:
Italicized items are available only when Admin User is set to Enable (in the PRINTER
CONTROL menu).
1
Gap/Mark Sensor and Paper Out Sensor work in conjunction, as shown in Table 6 on page 127. If
you change the Gap/Mark Sensor or Paper Out Sensor, you must recalibrate the media.
2
Appears only if the CTHI option is installed.
3
This menu will not appear on Direct Thermal only printers.
4
This menu appears only if RFID is installed and there is no CST bundle in the Flash File System.
5
This menu appears only if RFID is not installed and there is a CST bundle in the Flash File System.
6
Menu available if CTHI option and IPDS option are not installed.
7
xxx represents the emulation name selected in the Active IGP Emul menu.
CALIBRATE
CTRL
(page 127)
1
SMT: Status
PAA: Select Tool
LP+ Emulation
CTHI Emulation
Active IGP Emul
xxx Diagnostics
1
Host Interface
Power Saver Time
Pwr Save Control
Display Language
Alarm
Power-up State
Ptx Setup SFCC
Cancel Key
Rcv. Status Port
Ret. Status Port
Compatibility
Del Char frm Fls
Ld Char from Fls
Save Char to Fls
Del Char frm RAM
Ld Char at PwrUp
Del Set frm Flsh
Ld Set from Flsh
Save Set to Flsh
Del Set from RAM
Ld Set at PwrUp
Overwrite Files
View File List
Delete Files
Flash Avail.
Optimize&Reboot
(continued in next column)
PRINTER
CONTROL
(page 135)
4
Print File List
5
Auto Locking
Set Lock Key
2
Ptx Setup Parse
PJL Enable
7
Page Mem Adjust
Max Font Buffer
Max Cache Memory
Max Cached Char
Standard Chars.
Bold Chars.
Extra Bold Char.
OCR-A Chars.
OCR-B Chars.
Tall Characters
Batch Counter
Feed Key Online
Admin User
6
85