Printronix T5204R Administrator's Manual page 210

Chapter 3
EPSON FX SETUP
NL at MPP+1
Specifies the linespacing action when the printline exceeds the rightmost print
position and text continues from the leftmost print position on a new line.
•
On (factory default). Moves to the first print position two lines down from
the current position.
•
Off. Moves to the first print position of the next print line.
Null Handling
This item allows the printer to either treat nulls as blank spaces or ignore
them. If nulls are ignored, the print position does not move.
•
Space (factory default). Treats nulls as spaces.
•
Ignore. Ignores nulls.
Null Suppression (Coax, TN3270)
This item allows the printer to either treat nulls as blank spaces or ignore
them. If nulls are ignored, the print position does not move.
•
Off (factory default). Ignores nulls.
•
On. Treats nulls as spaces.
Null Suppression (IPDS)
•
Disable (factory default). When disabled, an exception is generated when
the IPDS data stream contains an 0x00.
•
Enable. When enabled, this option ignores the EBCDIC value 0x00 in the
IPDS data stream.
Optimized Ratio
This option selects different bar code ratios for certain bar codes including
Code 39 and Interleaved 2 of 5. It is included for compatibility with the IGP-
X00 printers.
•
Disable (factory default). Use standard bar code ratios.
•
Enable. Select the alternate bar code ratios.
Overstrike
Overstrike determines the action required when a line is printed over a
previous line because a carriage return was received without a line feed.
•
Enable (factory default). Prints the second line on top of the first line.
•
Disable. Replaces the characters from the first line with the second line.
210