Printronix T5204R Administrator's Manual page 366

Appendix G
The PTX_SETUP Commands
Command Sub-Command
FILE_IO CAPTURE
(DISK_IO)
DRIVE
PROPS
DEL
366
Table 32. General PTX_SETUP Commands
Parameter
Filename
Letter
File;Prop
Filename
Description
Captures all incoming data into a file
named Filename. Receipt of a
FILE_IO–CAPTURE command
without the Filename parameter will
force the file data to be written to
flash, and will end the file capture.
This command is parsed for
backwards compatibility. However,
since the flash file system is a single
device, the drive letter will be
ignored.
The PROPS command will set the
file properties of a given file. The file
properties are a four letter, case
sensitive file descriptor. The
properties field can be used to
ensure that a file is used for its
intended purpose. Once properties
have been associated with a file,
they cannot be changed.
The DEL command will mark a file
as deleted. The space the file
occupied will be freed the next time
the printer is powered up.