Printronix T5204R Administrator's Manual page 331

Table 18. LCD Message Troubleshooting (continued)
Displayed Message
Validator not
communicating
WAITING FOR
PROGRAM
DOWNLOAD
WIRELESS
ADAPTER
NOT COMPATIBLE
Can User
Explanation
Correct?
Yes The Validator Funct. =
Enable in the
VALIDATOR menu, but
when the printer was
first powered up it
could not communicate
with the validator.
Yes Normal message when
the printer is powered
up while holding down
both the MENU key
and the DOWN arrow
key in preparation to
download software to
the printer.
No The type of wireless
card is incompatible
with the printer
software.
Fault Messages
Solution
Check that the validator signal
cable is securely connected to
the validator unit.
1. Complete the downloading
software procedure. See
"Downloading Software"
on page 265.
2. Exit this procedure by
cycling printer power.
The PCMCIA radio card that
you installed may be
incompatible with the dual NIC
interface in the printer. Verify
the approved brand and model
number of the radio card with
your printer service provider
and install the correct version.
If using the correct radio card
does not resolve this problem,
call your service provider for
further support.
331