Printronix T5204R Administrator's Manual page 217

Select SO Char
Allows you to specify a decimal code from 0 through 255 to be used in place
of SO (Shift Out) as the control code which allows access for the alternate set
of control function characters. See the description of the Code 128 barcodes
in the PGL Programmer's Reference Manual for details.
The range is 0-255, and the factory default is 14.
Set Text Orientn (Coax, Twinax)
Specifies the direction in which characters are printed on the page. This
allows the printer to print languages which are printed right to left instead of
left to right.
•
Control By Host (factory default). Allows printers configured as a 4234 to
use the "Set Text Orientation" command from the host.
•
Left to Right.
•
Right to Left. When you select a right to left language, the host will be
notified of print direction changes when the printer is put online.
Set Text Orientn (TN3270, TN5250)
Specifies the direction in which characters are printed on the page. This
allows the printer to print languages which are printed right to left instead of
left to right.
•
Left to Right (factory default).
•
Right to Left. When you select a right to left language, the host will be
notified of print direction changes when the printer is put online.
SFCC Char (SPC Coax, SPC Twinax)
Determines what character is printed when an EBCDIC Logical Not character
¬ (Hex 5F) is received from the host.
•
User Defined* (factory default)
•
Set 1 <%>
•
Set 2 ^^$
•
Set 3 _%_
SFCC d command
This menu option is for backward compatibility.
•
Even dot plot (factory default). This option interprets the SFCC d
command as even dot plot.
•
Double high. This option interprets the SFCC d command as double
high. Select this option for backward compatibility.
Emulation Submenus
217