Printronix T5204R Administrator's Manual page 183

Absorb After ^PY
•
Absorb Motion (factory default). The paper motion line terminator
immediately following the graphics ^PY command will be ignored.
•
Absorb All. The system ignores all the data following ^PY until a host
generated terminator is detected and ignored.
•
Disable. System terminators following a graphics command are sent to
the printer and result in paper motion.
Active Char Set
Selects which group of character sets (Primary or Secondary) will be active.
The factory default is Secondary Set.
AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose application
identifier (AI) is 00.
•
Disable (factory default). The printable data field is printed with the AI
enclosed in parentheses. This is the standard EAN/UCC-128 format.
•
Enable. The printable data field is printed with the UCC fields separated
by spaces. This option is IGP-X00 compatible.
Alt. Char Set
•
Set 1 (factory default). Interprets data in the range of hex 80 through hex
9F as a control code.
•
Set 2. Prints data in the range of hex 80 through hex 9F.
Alt. Set 80-9F (P-Series, Serial Matrix, Epson FX)
•
Control Code. Interprets data in the range of hex 80 through hex 9F as a
control code.
•
Printable. Prints data in the range of hex 80 through hex 9F.
The factory default is Control Code. However, when the CTHI option is
installed, the factory default is Printable.
Emulation Submenus
183