Diagnostics - Printronix T5204R Administrator's Manual

XOH-SMO Support
This option allows the user to disable reporting of XOH-SMO support in the
STM reply.
This feature has been added because some hosts will not send an IPDS
XOH-SMS to a printer that reports it is a Continuous Forms printer, and also
supports XOH-SMO.
•
•

DIAGNOSTICS

DIAGNOSTICS
(from page 91)
Printer Tests Test Count
Auto Calibrate* Continuous*
Checkerboard 1 Page
Grey 2 Pages
Grid 5 Pages
Current Config 10 Pages
Left Test
Right Test
Combo Test
Ethernet Test
Barcode Demo
Novram Err Log
1
ODV/RFID Report
Print Error Clear Error
Log Log
Head Print Head On
Dist Time
2
XXXXX inches XX.X Hours
Enable (factory default). The printer reports that it has support for XOH-
SMO.
Disable. The printer does not report that it has support for XOH-SMO.
Software
Build
XXXXXX Ver. XX X
FLASH
Installed
2
XX Megabytes XX Megabytes
Reset Head
Data
2
XXX DPI
* = Factory Default
1
Appears only if the validator and/or RFID encoder is installed.
2
You cannot change this value; it is a display only item.
3
The menu appears only if a feature file has been downloaded to the printer.
Feature Hex Dump
4
File Mode
2 2
XXXXXX- XXX Disable*
Enable
Ptr On Time
DRAM
Installed
2
XXX.X Hours
Head Type
2
Emulation Submenus
Auto
Dump
Disable*
Enable
Ptr Media
Dist
2
2
XXXXX inches
225