Printronix T5204R Administrator's Manual page 185

Auto Skip at End
Specifies whether to perform an automatic form feed at the end of a print
buffer. If form feed is the last character in the print order, the form feed
function is supplied by the Auto Skip At End option.
•
Off (factory default). Sets the printer to print at print position 1 of the next
line.
•
On. Sets the printer to print at print position 1 of the first line of the next
form.
Auto Uppercase
This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
•
Disable (factory default). The printer will print text in upper and
lowercase.
•
Enable. The printer will print text in uppercase only.
Autoeject (VGL)
Determines paper handling upon exiting the VGL Repeated Form and
Dynamic Form commands.
•
Disable (factory default). Holds the print position at the bottom of the
form.
•
Enable. Issues a form feed after the last form is printed so all pages will
be physically printed.
Autowrap
This parameter determines if text will wrap to the next line when the line of
text exceeds the right margin.
•
Disable (factory default). Truncates the text beyond the right margin until
a CR or CR + LF is received.
•
Enable. Automatically inserts a CR + LF after a full print line.
Barcode var.
This command only applies for IBARC barcode command format.
•
Low Resolution (factory default). Sets barcode ratio dot values to be
interpreted as line matrix printer dots (60 x72).
•
High Resolution. Sets barcode ratio dot values to be interpreted as print
engine dots (300 x 300 or 203 x 203).
Emulation Submenus
185