Printronix T5204R Administrator's Manual page 196

Chapter 3
EPSON FX SETUP
Define CR code
This option controls the action of the printer when it receives a Carriage
Return code (0D hex) from the host computer. If this feature is enabled, each
time the printer receives a carriage return, it inserts an additional Line Feed
code (0A hex) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
NOTE: For this menu to take effect in PGL, PGL Normal needs to be set to
•
CR = CR (factory default). Does not insert an extra line feed after each
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage return. The
next print position will be print position 1 of the next line.
Define LF code (PGL, Serial Matrix, Proprinter XL, Epson FX)
This parameter forces the printer to insert an automatic Carriage Return code
into the data stream whenever a Line Feed code occurs. This can be used in
most installations, but it is required if the host computer does not send
carriage returns to the printer.
NOTE: For this menu to take effect in PGL, PGL Normal needs to be set to
•
LF = LF (factory default). Does not perform an automatic carriage return.
The next print position will be at the current print character position on the
next line.
•
LF = CR + LF. Performs an automatic carriage return. The next print
position will be print position 1 of the next line.
Define LF code (P-Series, P-Series XQ)
•
LF = CR + LF (factory default). Forces an automatic carriage return with
each Line Feed command received. The next print position is position 1 of
the next line.
•
LF = LF. Does not perform an automatic carriage return when a Line Feed
command is received. The next print position will be the current print
position on the next line.
196
PGL Menu.
PGL Menu.