Printronix T5204R Administrator's Manual page 335

I. Tag Specification
(Mark Sensing)
Black Mark (on underside)
K
Recommended
Cross Perf
D
Location
A
Direction of Media Motion
A Label Width Range
B Backing Width Range
C Min. Gap/Hole/Notch Height
K Min. Refl. Mark Height
I Min Refl. Mark Width
E Media Thickness Range
G Width of Inter-label gap/hole
D Media Length Range
Continuous/Batch Mode
Tear-Off Strip Mode
Tear-Off Mode
Peel-Off Mode
Cut Mode
These figures are approximate and depend upon the active emulation and application.
(1)
1.5 inch with validator support.
II. Tag Specification
(Gap Sensing)
G
Recommended
Cross Perf
D
Location
C
A
Direction of Media Motion
Figure 9. Media Dimensions
Table 21. Media Specifications
T5X04R
SL5X04R
1.00 -4.5 in.
19.1-114.3 mm
0.75-4.5 in.
19.1-114.3 mm
0.10 in.
2.54 mm
0.10 in.
2.54 mm
0.5 in.
12.7 mm
.0025-.010 in.
.0635-.254 mm
0.25-0.50 in.
6.35-12.7 mm
0.25 in. (6.35mm) - 99 in. (2515mm)
0.25 in. (6.35mm) - 99 in. (2515mm)
1 in. minimum (25.4 mm) - 99 in. (2515 mm)
1 in. minimum (25.4 mm) - 99 in. (2515 mm)
1 in. minimum (25.4 mm) - 99 in. (2515 mm)
III. Label Specification
(Gap Sensing)
G
E
A
B
Direction of Media Motion
T5X06R T5X08R
SL5X06R
2.0-6.8 in. 3.0-8.75 in.
50.8-172.7 mm 76.2-222.3 mm
2.0-6.8 in. 3.0-8.75 in.
50.8-172.7 mm 76.2-222.3 mm
0.10 in. 0.10 in.
2.54 mm 2.54 mm
0.10 in. 0.10 in.
2.54 mm 2.54 mm
0.5 in. 0.5 in.
12.7 mm 12.7 mm
.0025-.010 in. .0025-.010 in.
.0635-.254 mm .0635-.254 mm
0.25-0.50 in. 0.25-0.50 in.
6.35-12.7 mm 6.35-12.7 mm
(1)
Media
D
C
335