Chapter
3
ETHERNET PARAMS
Job Control
•
Standard (factory default). The NIC waits for the entire job to be received
before it indicates the job is done.
•
Enhanced. The NIC waits for the entire job to be printed before it
indicates the job is done.
•
Fast Standard. The EOJ (End of Job) packet is acknowledged
immediately. Use this option if the job is timed out due to a delay in the
acknowledgement of the EOJ packet because of the amount of data
being printed.
•
Off. There is no synchronization between the NIC and the printer when
printing a job.
NOTE: For detailed information about using the NIC, refer to the Network
Offline Process
•
Disable (factory default). When set to disable, the printer does not
process network data while offline.
•
Enable. When set to enable, the printer continues to process (but not
print) the current network/parallel job while the printer is offline until the
printer's buffer is full.
248
Interface Card User's Manual.