Printronix T5204R Administrator's Manual page 184

Chapter 3
EPSON FX SETUP
Alt. Set 80-9F (Coax, Twinax, TN3270, TN5250)
•
Printable (factory default). Prints data in the range of hex 80 through
hex 9F.
•
Control Code. Interprets data in the range of hex 80 through hex 9F as a
control code.
Append Rotated
•
Disable (factory default). Logos and alphanumeric strings are treated as
separate elements.
•
Enable. Appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation.
Auto FF at ^PN
When enabled, an FF will be generated automatically to slew to the end of
form when the ^PN command is encountered and when the current vertical
position is not at the top-of-form.
The options are Disable (factory default) and Enable.
Auto LF (P-Series, P-Series XQ)
This option defines the printer action when print data is received past the
forms width setting.
•
Disable (factory default). Discards any data past the forms width.
•
Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
Auto LF (Serial Matrix, Proprinter XL, Epson FX)
This option defines the printer action when print data is received past the
forms width setting.
•
Enable (factory default). Performs an automatic carriage return and line
feed when data is received past the forms width.
•
Disable. Discards any data past the forms width.
184