Using The Optional Internal Rewinder; Batch Rewind Mode - Printronix T5204R Administrator's Manual

Using the Optional Internal Rewinder

The printer can be set up to rewind labels after they have been printed (Batch
Rewind Mode) or to automatically peel labels from their backing and dispense
them one at a time while rewinding the liner (Peel-Off Mode). Both modes
require an internal rewinder, which is available as a factory installed or a field
unit option.

Batch Rewind Mode

Batch Rewind allows you to automatically rewind printed labels into a roll
using the optional internal rewinder.
Configuring the Printer Menu
1. Set Media Handling to "Continuous" under the QUICK SETUP menu.
2. Press the PAUSE key until "OFFLINE" displays.
Installing the Paper Path
The paper path must be installed when using Batch Rewind mode.
Front Door
Paper
Path
To install the paper path:
1. Open the front door by pulling it upwards, then forward.
(See Chapter 3, "Configuring The Printer" for more information.)
Groove
Batch Rewind Mode
Hook
43