Specifying A Power-Up Configuration - Printronix T5204R Administrator's Manual

Chapter 3
Overview

Specifying a Power-Up Configuration

You can specify any one of the nine configurations (1-8 or Factory) as the
power-up configuration:
1. Press the
MENU MODE
CONFIG. CONTROL
2. Press the ↓ key until the following message displays:
Power-Up Config.
1*
3. Press the
the desired number displays, press the ↵ key to select it. The following
message displays:
Power-Up Config.
X*
NOTE: If the configuration number has not been saved previously, the
CONFIG. DOES NOT
EXIST/Save First
78
. .
key until the following message displays:
.
+
or − key to cycle through the options (1-8 and Factory). When
following error message displays:
If this error message displays, see "Saving a Configuration" on
page 76. Once you have saved a configuration, repeat the steps in
this procedure.