Printronix T5204R Administrator's Manual page 119

Print Direction and Orientation are two independent options that can be
combined to produce the following results depending on the Active IGP
Emulation:
Print Direction
Orientation Option
Option
Head First
Head First
Head First
Head First
Print Direction
Orientation Option
Option
Foot First
Foot First
Foot First
Foot First
The factory default is Head First when PGL or VGL is enabled.
The factory default is Foot First when ZGL is enabled.
Label Wait Time
When Media Handling is set to Tear-Off Strip or Continuous, and Continuous
Mode is set to Tear Strip Full, Label Wait Time specifies the number of
seconds after printing stops that the printer will wait before it advances media
to the tear bar position.
When Media Handling is set to Peel-Off or Tear-Off, Label Wait Time
specifies the number of seconds the printer will wait after a label is removed
from the peel/tear bar before starting to print the next label.
The range is 0.1 to 60.0 seconds, and the factory default is 0.1 second.
MEDIA CONTROL Submenus
Table 4. Head First
Result in Active Emulations
Portrait
Landscape
Inv. Portrait
Inv. Landscape
Table 5. Foot First
Result in Active ZGL Emulation
Portrait
Landscape
Inv. Portrait
Inv. Landscape
(PGL or VGL)
Portrait
Landscape
Inv. Portrait
Inv. Landscape
Portrait
Inv. Landscape
Inv. Portrait
Landscape
119