Printronix T5204R Administrator's Manual page 220

Chapter 3
EPSON FX SETUP
•
Bottom of Line (factory default). Text is positioned as if it were at the
bottom of a 6 lpi line space. The following example shows both Top of
Line and Bottom of Line text positions:
Dot
Dot
Row
Row
Top of Line Space
Top of Line Space
Bottom of 8 LPI Line Space
Bottom of 8 LPI Line Space
Bottom of 6 LPI Line Space
Bottom of 6 LPI Line Space
Top Margin
Defined in linespaces, starting from line zero at the top of the page and
incrementing from the top down.
The range is 0-451 linespaces, and the factory default is 0 linespaces.
Translate Table
•
Default (factory default). The option is disabled. The table is not stored in
the real translation table until the option is enabled.
•
Downloaded. The option is enabled. The LU3 Translation Table is
loaded from the buffer into the permanent table.
Translation Tbl (Coax, TN3270)
Prints SCS and DSC/DSE tables of the coax interface's current character set.
This operation is valid only when the coax interface is selected as the current
interface.
Translation Tbl (SPC Coax)
Prints a table of the coax interface's current character set. This operation is
valid only when the coax interface is selected.
Translation Tbl (SPC Twinax)
Prints a table of the twinax interface's current character set. This operation is
valid only when the twinax interface is selected.
220
Text Position
Text Position
Top of Line
Top of Line
Text Position
Text Position
Bottom of Line Bottom of Line