Starting The Configuration Program - Extron electronics mediaport 200 User Manual

5.
If the
File Download - Security Warning
downloading the installer file.
NOTE: If you want to save the installation file to your computer hard drive to run
later, click
desired location. When you are ready to install the software, double-click on the
pcss_vnxnxn.exe
this procedure at step 7.
If, instead, you see a
displays the name
6. On the next prompt window that opens, click
7. Follow the instructions on the
software program installation. By default the installation creates a folder called "Extron
PCS" in one of the following location on the computer (depending on Windows version):
c:\Program Files (x86)\Extron\Extron PCS
c:\Program Files\Extron\Extron PCS
If there is not already an Extron folder in your Program Files or Program Files (x86) folder,
the installation program creates it as well.

Starting the Configuration Program

1. To run the PCS configuration program, do either of the following:
Double-click on the EAF.exe file, located on your computer at
•
c:\Program Files
Access the program from the
•
a.
b.
c.
d.
e.
. On the
Save Save As
icon, click
Run
icon at the bottom of the page, wait until the icon
Download
pcss_vnxnxn.exe
InstallShield Wizard
[or
Program Files(x86)]\Extron\Extron PCS.
Start
Click on your computer screen.
Start
Select from the
All Programs
From the All Programs menu, select
From the
Extron Electronics
Product Configuration Software
From the folder submenu, select
The
Extron Product Configuration Software
MediaPort 200 • Remote Configuration and Control
window appears, click
window that opens, save the setup file to the
on the screen that opens, and restart
Download
, then click it.
to start the installation process.
Run
screens to complete the
or
menu on your computer as follows:
menu.
Start
Extron Electronics
drop-down submenu, select the
folder.
Extron Product Configuration Software
window opens.
to begin
Run
.
Extron
.
75