Extron electronics mediaport 200 User Manual page 71

Command
Ethernet Data Port
NOTES:
•
If no data is received during the timeout period the Ethernet connection is closed.
•
With an RS-232 or USB connection, only the global timeout commands apply. A current connection timeout
command returns error code E13.
Set current connection
port timeout period
13
View current connection
port timeout period
13
Set global IP port timeout
View global IP port
timeout
Serial Data Port
View parameters
Directories
NOTE: A directory is a text string consisting of letters (a through z, A through Z), digits (0 through 9), hyphen or minus sign
(-), plus sign (+), or colon (:). No blanks or space characters are permitted.
Create or change
directory
Move back to root
directory
Move up one directory
View current directory
X6(
NOTE: = Number of seconds (stated in tens of seconds) before timeout on IP connections:
Minimum = 1 (10 seconds), maximum = 65000 (650,000 seconds), default = 30 (300 seconds)
Each step = 10 seconds. Response contains leading zeros.
X7(
= Baud rate for serial port
X8)
= Parity for serial port
X8!
= Stop bits for serial port
X8@
= Data bits for serial port
ASCII Command
(Host to Unit)
E X6( }
0 * TC
E }
0 TC
E X6( }
1 * TC
E }
1 TC
E 1 CP }
E
{path}/{directory}/ CJ
NOTE: A directory does not exist until a file has been copied into the path.
E }
/CJ
E }
.. CJ
E }
CJ
Response
(Unit to Host)
X6( ]
Pti 0 *
X6( ]
X6( ]
Pti 1 *
X6( ]
X7( X8) X8! X8@ ]
, , ,
With tagged responses (verbose modes 2 and 3):
X7( X8) X8!
Cpn01 • Ccp , ,
}
Dir • {path}/{directory}/
]
Dir • /
Dir • {path} / {directory} /
]
{path} / {directory} /
MediaPort 200 • Remote Configuration and Control
Additional Description
Set number of seconds (in tens
of seconds) before timeout on the
current IP connection only.
X6(
= 1 through 65000. Default is
30 = 300 seconds = 5 minutes.
View the current timeout setting.
Set number of seconds (in tens of
seconds) before timeout on all IP
connections from this unit.
X6(
= 1 through 65000.
Default is 30 = 300 seconds =
5 minutes.
View the current global timeout
setting.
X8@
,
X7( X8) X8!
View settings , , , and
X8@
for the connected serial port
]
]
65