Extron electronics mediaport 200 User Manual page 36

The following flowchart provides an overview of the
Quick
Setup
Menu
Input Rotate either
Presets knob to select a setting.
Next
Recall Preset
Next
<N/A>
Select an input preset.
• N/A (Default)
Range: 1-16
•
Figure 30. Input Presets Menu
Saving or recalling an input preset
1. Press the button until
Menu
2. Press the button until the desired submenu name is displayed:
Next
.
Save Preset
3. Rotate either knob until the LCD screen displays the number of the user image
Adjust
preset to which you want to save the current settings, or that you want to recall.
4. Press to save or recall the preset. Then the operation is completed, the
Next
menu reappears.
Presets
If you want to exit the input presets function without saving a preset, press
NOTES:
• The user image presets are saved in nonvolatile memory. Therefore, powering
down the scaling bridge does not lose the presets.
• The user image preset name can be assigned only using SIS commands (see
the Input (User Image) Presets commands
software (see the program help file).
• User image presets can be saved at one input resolution and rate and recalled
to a different one.
Example: If the current output resolution is 640x480 and a 720p input is
applied, you can size and center a "letterbox" image for a 16:9 input resolution
and save it to an user image preset. Subsequently, if a 1080p resolution is
applied to the unit, the letterbox preset that was saved at 720p can be recalled
with the new 1080p input resolution.
Input Presets
Adjust
Save Preset
<Unassigned>
Next
Save the current input
settings to a preset.
Unassigned (Default)
•
Range: 1-16
•
is displayed in the LCD window.
Input Presets
on page 56) or the PCS control
MediaPort 200 • Operation
menu and submenus.
or
Recall Preset
Input
.
Menu
30