Advanced Configuration Menu - Extron electronics mediaport 200 User Manual

The following selections are available from the
• Far End Mix, Program — Lets you set the level of the program audio that is sent to
the far end. Rotate either
of 1 dB. The default is
• Far End Mix, Microphone — Lets you set the level of the microphone audio that
is sent to the far end. Rotate either
decrements of 1 dB. The default is
• Near End Volume, Program — Lets you set the volume level of the far end and
program audio as heard locally. Rotate either
increments or decrements of 1 dB. The default is
Audio Test — Sends pink noise to any of the audio outputs to test the audio during
•
system configuration. Rotate the left
Rotate the right encoder to select

Advanced Configuration Menu

The
Advanced Configuration
setting, view the internal temperature of the unit, and reset the unit. Figure 36 gives an
overview of the items available on this menu.
Audio
Configuration
Menu
Advanced
Configuration
Next
Test Pattern
Off
Next
Select a test pattern.
Off (Default)
•
Crop
•
Alternate Pixels
•
Cross Hatch
•
• Color Bars
• Gray Scale
Figure 36.
knob to adjust the level in increments or decrements
Adjust
dB.
-6
Adjust
+0
On
menu enables you to select a test pattern and an overscan
Turn either knob
Adjust
to select a setting.
Overscan
Next
0.0%
Select an overscan for
SMPTE input rates.
• 0.0% (Default)
• 2.5%
• 5.0%
Factory Reset
<No>
Reset the unit to factory defaults.
• No (Default)
• Yes
Advanced Configuration Menu
Audio Configuration
knob to adjust the level in increments or
dB.
knob to adjust the volume level in
Adjust
dB.
+0
knob to select the audio channel to test.
Adjust
to enable or to disable sending the pink noise.
Off
Internal Temp.
Next
nnnF
60-1488-001
Next
vn.nn.nnnn–bnnn
MediaPort 200 • Operation
menu:
nnnC
Next
38