Extron electronics mediaport 200 User Manual page 89

Setting a password
To assign a password:
1. In the panel, click
Passwords
2. If requested, enter a Login ID. The default is
3. Enter the new administrator password in the
4. Repeat the password in the
Figure 54. Passwords Dialog Box with Administrator Password Entered
5. If you want to assign a user password, enter it in the
6. Reenter the same user password in the next
7. When finished, click the
To remove an assigned password:
1. In the
Administrator Password
2. Enter a single space in the appropriate
3. Click .
Apply
Date/Time Settings — In this panel you can view and set the unit date and time.
F
Figure 55. Date/Time Settings Panel
To set the MediaPort date and time to match that of your
•
computer, click
Sync to PC
sync is completed, the message at right appears.
. The
Set Passwords
.
Admin
Administrator Password
field (see figure 54).
Confirm Password
Confirm Password
button to set the passwords.
Apply
or
User Password
Confirm Password
(see figure 55, ). When the
1
MediaPort 200 • Remote Configuration and Control
dialog box opens.
field.
field.
User Password
field.
field, enter a single space.
field.
83