Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Extron electronics HAI 100 4K
Summary of Contents for Extron electronics HAI 100 4K
- Page 1 User Guide HDMI HAI 100 4K HDMI Audio Embedder 68-2801-01 Rev. B 01 19...
- Page 2 Safety Instructions Safety Instructions • English Istruzioni di sicurezza • Italiano WARNING: This symbol, , when used on the product, is intended to AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad alert the user of the presence of uninsulated dangerous voltage within avvertire l’utente della presenza di tensione non isolata pericolosa the product’s enclosure that may present a risk of electric shock.
- Page 3 ついては、 エクス トロンのウェブサイ ト より 『Extron Safety www.extron.com and Regulatory Compliance Guide』 (P/N 68-290-01) をご覧ください。 Copyright © 2016-2019 Extron Electronics. All rights reserved. Trademarks All trademarks mentioned in this guide are the properties of their respective owners. The following registered trademarks( ®...
- Page 4 FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 5: Table Of Contents
Contents Introduction Reference Information ............1 ........14 About the HAI 100 4K HDMI Audio Embedder ... 1 Mounting ............14 Tabletop Placement ........14 Features ............. 2 Rack Mounting ..........14 Under-desk and Furniture Mounting ....15 Panels and Cabling .......... -
Page 6: Introduction
S/PDIF digital audio onto the HDMI output signal. The HAI 100 4K includes an HDMI input, analog stereo audio and S/PDIF audio inputs, as well as an HDMI output. It is HDCP compliant and supports data rates up to 10.2 Gbps. The HAI 100 4K is compatible with video resolutions up to 4K. -
Page 7: Features
Features Embeds two-channel analog or S/PDIF digital audio onto an HDMI signal — • The HAI 100 4K offers the flexibility to embed separate analog or digital audio signals onto an HDMI signal. • Supports two-channel stereo analog audio, or two-channel or multi- channel S/PDIF digital audio —... -
Page 8: Panels And Cabling
HDMI input (see page 5) HAI 100 4K INPUT OUTPUT AUDIO INPUTS HDMI output (see page 5) Analog audio input (see page 5) Figure 3. HAI 100 4K Rear Panel S/PDIF audio input (see page 5) HAI 100 4K • Panels and Cabling... - Page 9 National Electrical Code ANSI/NFPA 70, article 725, et au Canadian Electrical Code, partie 1, section 16. La source d’alimentation ne devra pas être fixée de façon permanente à une structure de bâtiment ou à une structure similaire. HAI 100 4K • Panels and Cabling...
- Page 10 The audio format on this output is determined by the content on the source device. By default, the unit is configured to always embed analog audio. Therefore, • the S/PDIF input is inactive. The input audio format setting can be configured using PCS or SIS commands. HAI 100 4K • Panels and Cabling...
-
Page 11: Configuration
EDID of the sink device is stored automatically upon hot plug detection (HDP). NOTE: When the sink is removed or power to the HAI 100 4K is cycled, the EDID is removed from the slot. The EDID is replaced with the default value until a new sink is detected and a new EDID is stored. -
Page 12: Setting Edid With Pcs Software
The HAI 100 4K scans and monitors the EDID of the sink device connected to the HDMI output. It determines the interface (DVI or HDMI) and color depth, and uses that information to adjust the signal so that it is compatible with the output device. -
Page 13: Color Bit Depth Support
12. Hot Plug Detect (HPD) The HAI 100 4K monitors HPD on each HDMI output to determine if a new sink has been connected. If necessary, the signal for that output is modified in response to the EDID of the connected device. -
Page 14: Sis Commands
Symbols are used throughout the table to represent variables in the command and response fields. Use the ASCII to HEX conversion table on the next page with the command and response table. HAI 100 4K • SIS Commands... - Page 15 4 = HDMI YUV 4:4:4 Limited 5 = HDMI YUV 4:2:2 Limited EDID slot number from lookup table (see table on page 7) X& EDID data as 128 or 256 bytes of HEX data (text representation) HAI 100 4K • SIS Commands...
- Page 16 3 = HDCP sink detected and encrypted X1& Output 5V mode: = Auto 5 V is enabled when a source with 5 V is present; otherwise, it is off. 1 = 5 V always enabled (default) HAI 100 4K • SIS Commands...
-
Page 17: Command And Response Table For Sis Commands
HDMI Audio Output Mute Verbose mode 2/3 Status Set Analog Audio Gain X1@] Set Analog Audio Attenuation X1@] Increment Analog Audio Gain X1@] X1@] Decrement Analog Audio Gain X1@] View Analog Audio Gain Verbose mode 2/3 X1@] HAI 100 4K • SIS Commands... - Page 18 Query Part Number 60-1364-01 Query Model Name Verbose mode 2/3 HAI-100-4K Inf01*HAI-100-4K Query Model Description Verbose mode 2/3 HDMI Audio Embedder Inf02*HDMI Audio Embedder Query Firmware Version x.xx Query Firmware Version with x.xx.xxxx Build HAI 100 4K • SIS Commands...
-
Page 19: Reference Information
Rack Mounting Procedure These units can be mounted an optional rack systems listed on the website (see www.extron.com). To mount the unit on a rack shelf, follow the instructions provided with the shelf accessories. HAI 100 4K • Reference Information... -
Page 20: Under-Desk And Furniture Mounting
Back of the Rack Mounting Procedure The HAI 100 4K can be mounted to the rear of a rack using an optional back of rack mounting kit (see www.extron.com). The kit allows the product to be vertically mounted to the front or rear rack supports and face either the front or the rear of the rack. To mount the unit, follow the instructions provided with the kit. -
Page 21: Using Pcs
HAI 100 4K. Updating Firmware with Firmware Loader To upload and update firmware for the HAI 100 4K, download the new firmware to a connected computer and upload the firmware with the Extron Firmware Loader utility. Downloading Extron Firmware Loader... -
Page 22: Downloading Firmware
Submit any required information to start the download. Note where the file is saved. Run the executable file (.exe file extension) and follow the on-screen instructions to place the firmware file and release notes on the PC. Note where the file is saved. HAI 100 4K • Reference Information... -
Page 23: Installing Firmware With Firmware Loader
Firmware Loader main window. Click the button to start the upload process. Begin Close Firmware Loader when the field shows , the Remaining Time 00.00.00 column shows , and the field shows Progress 100% Status completed HAI 100 4K • Reference Information... -
Page 24: Extron Warranty
Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.