Extron electronics mediaport 200 User Manual page 60

Command
Input Configuration (continued)
HDCP Status
View HDCP status for
the input
View HDCP status for
the output
Picture Control
Contrast
Set a specific value
Increment contrast value
Decrement value
View
Brightness
Set a specific value
Increment value
Decrement value
View
Horizontal Position (Image)
Set a specific value
Increment value
Decrement value
View
X1%
NOTE: = Picture adjustment (brightness and contrast): 0 through 127 (default = 64)
X1^
= Horizontal or vertical position. Response is 4 digits with leading + or - and padded with zeros. Must be
divisible by 8.
• H range: ± horizontal streaming resolution
• V range: ± vertical streaming resolution
X4$
= HDCP status: 0 = No sink or source device detected, 1 = Sink or source device detected with HDCP,
2 = Sink or source device detected with no HDCP present
ASCII Command
(Host to Unit)
E }
I 1 HDCP
E }
O 2 HDCP
E X1% }
CONT
E }
+ CONT
E }
- CONT
E }
CONT
E X1% }
BRIT
E }
+ BRIT
E }
- BRIT
E }
BRIT
E X1^ }
HCTR
E }
+ HCTR
E }
- HCTR
E }
HCTR
Response
(Unit to Host)
X4$ ]
With tagged responses
(verbose modes 2 and 3):
X4$ ]
Hdcp I 1 *
X4$ ]
With tagged responses
(verbose modes 2 and 3):
X4$ ]
Hdcp O 2 *
X1% ]
Cont 1 *
X1% ]
Cont 1 *
X1% ]
Cont 1 *
X1% ]
With tagged responses
(verbose modes 2 and 3):
X1% ]
Cont 1 *
X1% ]
Brit 1 *
X1% ]
Brit 1 *
X1% ]
Brit 1 *
X1% ]
With tagged responses
(verbose modes 2 and 3):
X1% ]
Brit 1 *
X1^ ]
Hctr
X1^ ]
Hctr
X1^ ]
Hctr
X1^ ]
With tagged responses
(verbose modes 2 and 3):
X1^ ]
Hctr
MediaPort 200 • Remote Configuration and Control
Additional Description
X4$
View status for the input.
X4$
View status for the output.
Set the range of image light and
X1%
dark values (contrast level) to
for the input.
Increase contrast level by 1.
Decrease contrast level by 1.
View the current contrast level for
the input.
Set the intensity of video light on
the screen (brightness level) to
X1%
for the input.
Increase brightness level by 1.
Decrease brightness level by 1.
View the current brightness level
for the input.
Set the horizontal position of the
image in relation to the center of
X1^
the screen to .
Shift the image right 1 pixel.
Shift the image left 1 pixel.
View horizontal position value
X1^
.
54