Table of Contents
Advertisement
9.
Follow the instructions on the InstallShield Wizard screens to complete the software
program installation. By default, the installation creates a folder called "Extron PCS" in
one of the following locations on the computer (depending on the Windows version):
c:\Program Files (x86)\Extron\Extron PCS or
c:\Program Files\Extron\Extron PCS
If there is not already an Extron folder in your Program Files or Program Files x86 folder,
the installation program creates it as well.
Starting the Configuration Program
In order to use the PCS software, the DVC must be connected to your computer via the rear
panel USB port (see
1.
To start the PCS configuration program, do either of the following:
Access the program from the Start menu on your computer as follows:
•
a.
b.
c.
Double-click on the EAF.exe file, located on your computer at
•
c:\Program Files [or Program Files(x86)]\Extron\Extron PCS.
2.
The first time you open the PCS software, the Tutorial screen appears, identifying
items on the toolbar at the top of the PCS screen. When finished looking at the tutorial,
click I Get It to close the screen. The Extron PCS window opens.
3.
In the Device Discovery panel of the PCS window, click on DVC RGB-HD A (see
figure 12,
listed. The Connect button in the bottom-right corner becomes available.
Figure 12.
Connecting for USB Control
Click Start on your computer screen.
Select All Programs from the Start menu.
From the All Programs menu, select Extron Electronics/Extron
Product Configuration Software/Extron Product Configuration
Software. The Extron Product Configuration Software window
opens.
). You may need to scroll to locate it, depending on the number of devices
1
Device Discovery Panel
DVC RGB-HD A • Remote Configuration and Control
on page 8).
21
Advertisement
Table of Contents
