Output Configuration Menu - Extron electronics mediaport 200 User Manual

Hdmi and audio to usb scaling bridge
Hide thumbs Also See for mediaport 200:
Table of Contents

Advertisement

Output Configuration Menu

The
Output Configuration
streaming resolution and rate, configure the HDMI loop output, and enable or disable the
HDCP notification. Figure 34 gives an overview of this menu.
Input
Configuration
Menu
Output
Configuration
Next
HDCP Note
On
Display or hide the green
HDCP notification screen.
On (Default)
Out
Figure 34.
USB Video Send — (View only) Displays the streaming resolution and refresh rate of
the current USB video output.
USB Audio Send — (View only) Displays the audio stream from USB, (always
24-bit @48 kHz
USB Format — Lets you select the USB video output streaming format. Rotate either
Adjust
HDMI Loop Format — Lets you select the digital format of the HDMI loop output. You
can select HDMI, DVI, or YUV video format. You can also discretely force any DVI or
HDMI video format.
NOTES:
menu lets you view the current USB audio and video
USB Video Send
Next
None
HDMI Loop Format
Next
Auto
Select the HDMI loop output
format.
Auto (Default)*
DVI RGB 444
RGB 444 Full
RGB 444 Limited
YUV 444 Full
YUV 444 Limited
YUV 422 Full
YUV 422 Limited
*Auto outputs DVI to a DVI sink and
HDMI RGB 444 Full to an HDMI sink.
Output Configuration Menu
), if audio is being sent.
knob to select between
MJPEG 422 Full
DVI — HDMI input signals are converted to DVI output format: RGB 444 full
8-bit, no audio, no InfoFrames.
HDMI — HDMI input signals are converted to the set HDMI output format.
This includes the correct AVI InfoFrame data for the current video output
(colorspace, quantization, and so on). Audio signals and audio InfoFrame pass
through unaltered.
The default setting,
, parses the EDID of the connected device and sets
Auto
the correct digital format. The
HDMI RGB 444 Full to any HDMI sink.
USB Audio Send
Next
24-bit @48 kHz
USB Format
Next
MJPEG 422 Full
Select the USB output
streaming format.
MJPEG 422 Full (Default)
MJPEG 420 Full
(the default) and
setting outputs DVI to a DVI sink and
Auto
MediaPort 200 • Operation
Next
.
MJPEG 420 Full
36

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents