Extron electronics mediaport 200 User Manual page 66

Command
Advanced Configuration (continued)
Front Panel Lock (Executive Mode)
Enable lock mode
Disable lock mode
View lock mode status
Video Signal Presence
View signal presence
Unsolicited Input Signal Status Notification
Enable
Disable
View setting
HDCP Notification — Green Screen
Enable notification
Disable notification
View setting
USB Terminal Type
Set USB terminal type
View USB terminal type
X1)
NOTE: = HDCP notification (green screen) or notification of unsolicited input signal status: 0 = Disable, 1 = Enable
X2(
= Front panel lock mode (executive mode): 0 = Unlock front panel (default), 1 = Lock front panel
X4*
= USB terminal type
1 = Non-echo canceling speakerphone (default)
2 = Echo canceling speakerphone
X6!
= Video signal presence: 0 = No input signal detected, 1 = Input signal detected
ASCII Command
(Host to Unit)
1 X
0 X
X
E }
0LS
E }
S 1 NTFY
E }
S 0 NTFY
E }
S NTFY
E }
N 1 HDCP
E }
N 0 HDCP
E }
N HDCP
E X4* }
C USBC
E ]
C USBC
Response
(Unit to Host)
]
Exe 1
]
Exe 0
X2( ]
With tagged responses
(verbose modes 2 and 3):
X2( ]
Exe
X6! ]
With tagged responses
(verbose modes 2 and 3):
X6! ]
In00 •
]
NTFY S 1
]
NTFY S 0
X1) ]
With tagged responses
(verbose modes 2 and 3):
X1) ]
Hdcp N
]
Hdcp N 1
]
Hdcp N 0
X1) ]
With tagged responses
(verbose modes 2 and 3):
X1) ]
Hdcp N
X4*]
Usbc C
X4* ]
X4* ]
Usbc C
MediaPort 200 • Remote Configuration and Control
Additional Description
Lock the entire front panel.
Unlock front panel controls.
All front panel changes can be
made.
View current lock mode status
X2(
.
X6!
View input signal status .
Enable unrequested notification
of changes in input signal status.
Disable unsolicited input signal
status notifications (default).
X1)
View setting for unsolicited
input signal status notifications.
Enable the HDCP notification
(default).
Disable the HDCP notification.
Instead, mute the output and
maintain the sync.
View HDCP notification status
X1)
.
Set the USB terminal type to
X4*
.
View USB terminal type X4*.
60