Extron electronics mediaport 200 User Manual page 68

Command
Information Requests (continued)
USB information
Host
Inf35 * Host
Query user memory
usage
Query firmware version
Query firmware build
version
Query part number
View internal temperature
IP Setup Commands
Set unit name
Set unit name to factory
default
View unit name
Set verbose mode
View verbose mode
X1@
NOTE: = Internal temperature in degrees Celsius. Response is 2 digits, padded with a zero.
X3!
= Verbose mode: 0 = None (default for Telnet), 1 = verbose mode on (default for RS-232 and USB),
2 = verbose mode off, tagged responses enabled for queries, 3 = Verbose mode and tagged responses for
queries enabled (see the
X3@
= Unit name: A text string of up to 24 characters (A-Z, 0-9, and the hyphen [-] are permitted.
• The first character must be a letter.
• The last character cannot be a hyphen.
• No blank or space characters are permitted.
• No distinction is made between uppercase and lowercase letters.
X3#
= Factory default name: MediaPort-200-xx-xx-xx (The last 3 character pairs are those of the MAC
address.)
ASCII Command
(Host to Unit)
35I
X1) X1)
• VSend • CommOut
X1) X1)
• VSend • CommOut
4I
Q
*Q
N
E }
20STAT
E X3@ }
CN
E }
• CN
E }
CN
E X3! }
CV
E }
CV
Verbose mode symbol definitions
Response
(Unit to Host)
(See below.)
X5( X5(
• CommIn • pcPlaybackIn
With tagged responses (verbose modes 2 and 3):
X5( X5(
• CommIn • pcPlaybackIn
{Bytes used out of
]
total Kbytes}
]
n.nn
With tagged responses
(verbose modes 2 and 3):
]
Ver01 * n.nn
]
n.nn.nnnn
With tagged responses
(verbose modes 2 and 3):
]
Bld n.nn.nnnn
]
60-1488-01
With tagged responses
(verbose modes 2 and 3):
]
Pno 60-1488-01
X1@ ]
With tagged responses
(verbose modes 2 and 3):
X1@ ]
20Stat •
X3@ ]
Ipn •
X3# ]
Ipn •
X3@ ]
With tagged responses
(verbose modes 2 and 3):
X3@ ]
Ipn •
X3! ]
Vrb
X3! ]
With tagged responses
(verbose modes 2 and 3):
X3! ]
Vrb
on page 50).
MediaPort 200 • Remote Configuration and Control
Additional Description
X5( X6) ]
• USBStd
X5( X6) ]
• USBStd
View the number of memory
bytes that have been used out
of the total number of Kbytes
of user memory.
View firmware version to the
second decimal place.
View firmware version (to the
second decimal place) and the
build (to the fourth decimal).
View the unit part number:
60-1488-01.
View unit internal temperature
in degrees Celsius.
Specify a name for the unit.
Reset the unit name to the factory
X3#
default name ( ).
View the name of the unit.
Set the verbose mode and tagged
X3!
responses ( ).
View the current verbose mode
and tagged responses status.
X1@
62