Extron electronics mediaport 200 User Manual page 65

Command
Advanced Configuration
Test Pattern
NOTE: X2@
can be entered as 1 digit, but is always a 2-digit number in returns.
Set test pattern
View test pattern
User Supplied Image
Select image file
View selected image
Freeze
Enable
Disable
View
Input Aspect Ratio
Enable fill mode
Enable follow mode
View aspect setting
Overscan Mode (Applies only to SMPTE input rates: 480i, 576i, and 1080p @ 50 Hz and 60 Hz.)
Set value
View status
X1)
NOTE: = Freeze or unfreeze the input: 0 = Unfreeze, 1 = Freeze
X2#
= Select test pattern: 0 = Off (default), 1 = Crop, 2 = Alternating Pixels, 3 = Crosshatch, 4 = Color Bars,
5 = Grayscale
X3*
= Overscan:
0 = 0.0% — A true Auto-Image is executed on SMPTE inputs (default for HDMI and DVI).
1 = 2.5% — An Auto-Image command snaps to a 2.5% table (no true Auto-Image is performed).
2 = 5% — An Auto-Image command snaps to a 5% table (no true Auto-Image is performed).
X3(
= Aspect ratio:
1 = Fill: The input rate fills the entire output raster (default).
2 = Follow: The input rate is displayed with its native aspect ratio.
ASCII Command
(Host to Unit)
E X2# }
TEST
E }
TEST
E }
A 1, filename LOGO
E }
A 1 LOGO
1 F
0 F
F
E }
1 * 1 ASPR
E }
1 * 2 ASPR
E }
1 ASPR
E X3* }
1 * OSCN
E }
1 OSCN
Response
(Unit to Host)
X2# ]
Test
X2# ]
With tagged responses
(verbose modes 2 and 3):
X2# ]
Test
]
Logo A 1 , filename
]
filename
In verbose modes 2 and 3:
]
Logo A 1, filename
]
Frz 1
]
Frz 0
X1) ]
With tagged responses
(verbose modes 2 and 3):
X1) ]
Frz
]
Aspr 1 * 1
]
Aspr 1 * 2
X3( ]
With tagged responses
(verbose modes 2 and 3):
X3( ]
Aspr 1 *
X3* ]
Oscn 1 *
X3* ]
With tagged responses
(verbose modes 2 and 3):
X3* ]
Oscn 1 *
MediaPort 200 • Remote Configuration and Control
Additional Description
X2#
Select test pattern .
View the current test pattern.
Assign logo filename as the
screen saver (displayed when
black screen is output).
View the file name of current
user-assigned logo.
Freeze the input.
Unfreeze the input.
View the freeze status.
Set the input to always fill the
entire output raster (default).
Set the input to preserve its
native aspect.
X3(
View input aspect ratio .
Set the HDMI input to overscan
X3*
mode .
X3*
Show overscan mode status
for the HDMI input.
59