Table of Contents
Advertisement
Product
Configuration
Software
The DCA 102 can be easily configured using Extron Product Configuration Software (PCS).
This section describes the software installation and communication. Topics include:
•
•
•
•
Software/Firmware Installation
Visit
NOTES:
1.
2.
3.
Software/Firmware Installation
PCS Overview
Connecting to PCS
Configuring the DAC 102 using PCS
www.extron.com
to download and install the PCS software.
•
Download the latest version of software and firmware of your product.
•
An Extron Insider account is required to download and use the firmware or software.
Hover over the Download tab at the top of the homepage (see figure 6,
Figure 6.
Software Links on Download Screen
Click the appropriate link on the drop-down list. The Download Center page opens.
For software, either click the Software link (
directly on that link (see the PCS Product Configuration Software link
skip to
step 5
on page 8.
NOTE: If there is no direct link to your software, click the Software link (
For firmware, click the Firmware link (
Scroll down to the alphabetic navigation bar (see figure 7).
Figure 7.
Alphabetic Navigation Bar
) or, if the software is listed, click
2
).
4
DAC 102 • Product Configuration Software
).
1
) and
3
).
2
7
Advertisement
Table of Contents
