Extron electronics mediaport 200 User Manual page 69

Command
IP Setup Commands (continued)
Attempting to set the IP address, subnet mask, or gateway address while DHCP is on results in an E14 error
NOTE:
message.
Set date and time
View date and time
View GMT offset
NOTE: Use the read available time zones command (
X7@
( ) to enter for your location with the set time zone command (
Read available time
zones
Set time zone
Set DHCP to On
Set DHCP to Off
View DHCP mode
Set IP address
14, 24
View IP address
View hardware (MAC)
address
X1)
NOTE: = DHCP mode: 0 = Off, 1 = On
X7)
= Local date and time.
• The set format is: MM/DD/YY-HH:MM:SS. (The hours, minutes, and seconds can also be separated by
periods.) Examples: 11/13/15-10:54:00 or 11/13/15-10.54.00
• The view format is: Www [day of the week],DD Mmm YYYY HH:MM:SS.
Example: Tue, 18 Nov 2015 18:19:33.
X7! = Current Greenwich Mean Time (GMT) for the MediaPort location. The GMT view format is hh:mm.
Example: 5:30 or 5.30 = +05:30.
X7@ =
A 2- to 6-digit code, such as PST for GMT - 8.00
X7# =
UTC offset and location name, such as (UTC-08:00) Pacific Time for PST
X7$ IP address in the format
=
in setting values and are suppressed in returned values. Factory default address (when DHCP is
turned off) is
X8#
= MAC address of the unit in the format 00-05-A6-xx-xx-xx.
ASCII Command
(Host to Unit)
E X7) }
CT
E }
CT
E }
CZ
E
E }
* TZON
E X7@ }
* TZON
E }
1DH
E }
0DH
E }
DH
E X7$ }
CI
E }
CI
E }
CH
nnn.nnn.nnn.nnn
.
192.168.254.254
Response
(Unit to Host)
X7) ]
Ipt •
X7) ]
X7! ]
With tagged responses
(verbose modes 2 and 3):
X7! ]
Ipz
}
* TZON ) to determine and select the time zone variable
E }
TZON ).
X7@ X7# ]
<multiple * s>
X7@ X7#]
Tzon *
]
Idh 1
]
Idh 0
X1) ]
With tagged responses
(verbose modes 2 and 3):
X1) ]
Idh
X7$ ]
Ipi •
X7$ ]
With tagged responses
(verbose modes 2 and 3):
X7$ ]
Ipi
X8# ]
With tagged responses
(verbose modes 2 and 3):
X8# ]
Iph
). Leading zeros in each of the four fields are optional
MediaPort 200 • Remote Configuration and Control
Additional Description
X7)
Set local date and time .
X7)
View local date and time .
View Greenwich Mean Time (GMT)
X7!
offset value for the MediaPort
location. GMT offset (-12.00
through +14.00) represents
the time difference in hours and
minutes (± hh:mm relative to
Greenwich, England). The plus
sign and leading zero are optional.
X7!
is in the format hh:mm.
Example: 5:30 or 5.30 = +05:30.
The MediaPort returns a list of
installed time zones.
Enable Dynamic Host Configuration
Protocol (DHCP) to enable automatic
assigning of IP addresses.
Disable DHCP automatic IP
address assignment.
X7$
Set IP address for the unit.
X7$
View unit IP address .
View unit media access code
X8#
(MAC) address .
63