Extron electronics mediaport 200 User Manual page 41

Input EDID Table
Resolution 23.98 Hz 24 Hz
640x480
800x600
1024x768
1280x768
1280x800
1280x1024
1360x768
1366x768
1440x900
1400x1050
1600x900
1680x1050
1600x1200
1920x1200
480p
576p
720p X
1080i
1080p X
2048x1080 X
Custom EDIDs
You can add custom EDIDs or save the EDID of the HDMI loop output using SIS commands
(see the HDMI Input EDID commands
software help file). These custom EDIDs are then added to the LCD menu.
HDCP Authorized
The MediaPort 200 accepts HDCP compliant signals and outputs them through the HDMI
loop out connection only.
NOTE: The USB output cannot display HDCP encrypted material under any
circumstances. It displays a green or black (user-selectable) screen when an HDCP
compliant signal is detected.
The HDCP Authorized function lets you disable HDCP communication by causing the
MediaPort input to report to a source device as a non-authorized HDCP sink (display).
This is useful with devices such as Mac computers, iPhones, iPads, and some Windows 7
sources that always encrypt their output if the downstream sink is HDCP-capable. If HDCP
signals are not allowed on an input, most content from these types of sources can be
passed as a non-encrypted signal to the USB output.
By disabling HDCP Authorized on the MediaPort HDMI input, you ensure that the source will
not encrypt its output and you are able to view your non-HDCP protected content from the
MediaPort video USB output.
If HDCP Authorized is disabled and HDCP protected content is selected for the source, the
source either mutes its video output to black or displays a warning message.
You can also select HDCP Authorized using SIS commands (see the
commands on page 53) or via the PCS control software (see the program help file).
25 Hz 29.27 Hz 30 Hz
X X X
X X X
X X X
on page 53) or the PCS control software (see the
50 Hz 59.94 Hz 60 Hz
X
X
X X X
X X
X X X
X X X
HDCP Authorized
MediaPort 200 • Operation
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
35