Table of Contents
Advertisement
Starting the Configuration Program
In order to use the PCS software, the DSC must be connected to your computer via the
front panel USB-C port or the rear panel LAN port.
1.
To start the configuration program, do either of the following:
From the desktop Start menu, select
•
Extron/Extron Product Configuration Software.
The Extron Product Configuration Software window opens.
•
Double-click on the EAF.exe file, located on your computer at
c:\Program Files(x86)]\Extron\Extron PCS.
In the Device Discovery panel of the PCS window, click on the name of your DSC 401
2.
or DSC 401 A (see figure 25,
number of devices listed.) The Connect button (
NOTE: If the DSC is connected via the LAN port (DSC 401 A only), its IP address
is displayed in the IP Address column. If it has a USB connection, the generic
address for devices connected via IP over USB (203.0.113.22) is displayed.
Figure 25.
3.
Click Connect (
4.
If the unit has a password defined, the following prompt opens:
Figure 26.
Enter the password for the unit and click Continue.
). (You may need to scroll to locate it, depending on the
1
Device Discovery Panel on Connection Screen
), or double-click on the DSC name in the Device Discovery list.
2
Password Prompt
DSC 401 and DSC 401 A User Guide • Remote Configuration and Control
) becomes available.
2
72
Advertisement
Table of Contents
