View Comm Settings Menu; Edit Comm Settings Menu - Extron electronics mediaport 200 User Manual

Hdmi and audio to usb scaling bridge
Hide thumbs Also See for mediaport 200:
Table of Contents

Advertisement

View Comm Settings Menu

The
View Comm Settings
ports, including the IP, subnet mask, and gateway addresses, the MAC (Media Access
Code or hardware) address, the Dynamic Host Configuration Protocol (DHCP) status, and
the serial port baud rate and type.
NOTE: None of the settings can be changed from this menu. To make adjustments, use
the
Edit Comm Settings
Figure 38 shows the screens and the settings that can be viewed from this menu.
Configuration
Serial Port
9600
View the RS-232 port parameters.
Next
View the subnet mask IP address.
Figure 38.

Edit Comm Settings Menu

The
Edit Comm Settings
Any changes to communication settings must be made from this menu.
Accessing the Edit Comm Settings menu
To make changes to the DHCP mode, IP address, gateway address, and subnet mask,
access the editing screens as follows:
1.
Press the
2.
Press the
screen (approximately 5 seconds).
3.
Press
NOTE: The Serial Port and MAC Address settings cannot be edited and remain
view-only in Edit mode.
4.
To change the DHCP mode setting:
a.
Press
b.
Rotate either
NOTE: DHCP must be set to
menu lets you view the current settings for the communication
menu (see
Advanced
Menu
View Comm
Settings
Next
Next
8
N
1
View the Media Access Code (MAC)
hardware address.
Subnet Mask
Gateway Address
Next
255.255.0.0
View the gateway IP address.
View Comm Settings Menu Flow
menu is an editable version of the
button until the
Menu
View Comm Settings
button and hold it until
Next
repeatedly to cycle through the
Next
until
is displayed on the LCD screen.
Next
DHCP Mode
knob to select
Adjust
address, or the subnet mask.
Edit Comm Settings
Menu, below).
MAC Address
Next
0005A60989CD
View Dynamic Host onfiguration
Protocol (DHCP) On/Off status.
Next
0.0.0.0
192.168.254.254
View the unit internet address.
View Comm Settings
menu is displayed.
Edit Comm Settings
Edit Comm Settings
or
.
On
Off
for you to edit the IP address, the gateway
Off
MediaPort 200 • Operation
DHCP Mode
Off
Next
IP Address
menu.
appears on the LCD
menu items.
40

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents