Table of Contents
Advertisement
7.
Follow the instructions on the
software program installation. By default the installation creates a folder called "Extron
PCS" in one of the following locations on the computer (depending on the Windows
version):
c:\Program Files (x86)\Extron\Extron PCS
c:\Program Files\Extron\Extron PCS
If there is not already an Extron folder in your Program Files or Program Files x86
folder, the installation program creates it as well.
Starting the Configuration Program
In order to use the PCS software, the DSC must be connected to your computer via the
front panel USB port (see
panel LAN port.
1.
To start the configuration program, do either of the following:
Access the program from the
•
a.
b.
c.
Double-click on the EAF.exe file, located on your computer at
•
c:\Program Files
2.
The first time you open the PCS software, the
items on the toolbar at the top of the PCS screen. When finished looking at the
tutorial, click
3.
In the
or
DSC HD-HD 4K Plus A xi
scroll to locate it, depending on the number of devices listed. The
the bottom-right corner becomes available.
InstallShield Wizard
Connecting for Remote Control
Click
on your computer screen.
Start
Select
from the
All Programs
From the
All Programs
Product Configuration Software
. The
Software
Extron Product Configuration Software
[or
Program Files(x86)]\Extron\Extron PCS.
to close the screen. The
I Get It
panel of the
Device Discovery
(see
figure
DSC HD-HD 4K Plus A Series • Remote Configuration and Control
screens to complete the
or
on page 14) or the rear
menu on your computer as follows:
Start
menu.
Start
menu, select
Extron Electronics/Extron
/
Extron Product Configuration
screen appears, identifying
Tutorial
window opens.
Extron PCS
window, click on
PCS
35,
, on the next page). You may need to
1
window opens.
DSC HD-HD 4K Plus A
button in
Connect
73
Advertisement
Table of Contents
