Table of Contents
Advertisement
9.
Follow the instructions on the InstallShield Wizard screens to complete the software
program installation. By default, the installation creates a folder called "Extron PCS" in
one of the following locations on the computer (depending on the Windows version):
c:\Program Files (x86)\Extron\Extron PCS
c:\Program Files\Extron\Extron PCS
If there is not already an Extron folder in your Program Files or Program Files x86 folder,
the installation program creates it as well.
Starting the Configuration Program
In order to use the PCS software, the DVC must be connected to your computer via the rear
panel USB port (see
1.
To start the PCS configuration program, do either of the following:
Access the program from the
•
a.
b.
c.
Double-click on the EAF.exe file, located on your computer at
•
c:\Program Files
2.
The first time you open the PCS software, the
items on the toolbar at the top of the PCS screen. When finished looking at the tutorial,
click
I Get It
3.
In the
figure 12,
listed. The
Figure 12.
Connecting for USB Control
Click
on your computer screen.
Start
Select
from the
All Programs
From the
All Programs
Configuration Software
Extron Product Configuration Software
[or
Program Files(x86)]\Extron\Extron PCS.
to close the screen. The
panel of the
Device Discovery
). You may need to scroll to locate it, depending on the number of devices
1
button in the bottom-right corner becomes available.
Connect
Device Discovery Panel
DVC RGB-HD A • Remote Configuration and Control
or
on page 8).
menu on your computer as follows:
Start
menu.
Start
menu, select
Extron Electronics/Extron Product
/
Extron Product Configuration Software
window opens.
screen appears, identifying
Tutorial
window opens.
Extron PCS
window, click on
PCS
. The
(see
DVC RGB-HD A
21
Advertisement
Table of Contents
