Command And Response Table For Sis Commands - Extron electronics mediaport 200 User Manual

Command and Response Table for SIS Commands

Command
Input Configuration
HDMI Input EDID
Assign EDID to the input
View assigned EDID
data
Save HDMI loop output
EDID
Export EDID file
Import EDID file
Auto-Image
Execute
Execute and Fill
Execute and Follow
HDCP Authorized
Input Reporting as an HDCP Authorized Device
Enable HDCP authorized
reporting
Disable HDCP authorized
reporting
View HDCP authorized
reporting status
X2)
NOTE: = EDID emulation. Response is 2 digits with leading zero.
1 = HDMI output (valid for EDID save and export only), 201 = Custom output rate 1,
202 = Custom output rate 2, 203 = Custom output rate 3
X6@
= Input HDCP authorized: 0 = Input HDCP Authorized disabled, 1 = Input HDCP Authorized enabled (default)
ASCII Command
(Host to Unit)
E X2) }
A 1 * EDID
E }
A 1 EDID
E X2) }
S 2 * EDID
E X2) }
E ,filename EDID
E X2) }
I ,filename EDID
A
1*A
2*A
E }
E 1 * 1 HDCP
E }
E 1 * 0 HDCP
E }
E 1 HDCP
Response
(Unit to Host)
X2) ]
Edid A 1 *
X2) ]
With tagged responses
(verbose modes 2 and 3):
X2) ]
Edid A 1 *
X2) ]
Edid S 2 *
X2) ]
Edid E
X2) ]
Edid I
]
Img 0
]
Img1
]
Img2
]
Hdcp E 1 * 1
]
Hdcp E 1 * 0
X6@ ]
With tagged responses
(verbose modes 2 and 3):
X6@ ]
Hdcp E 1 *
MediaPort 200 • Remote Configuration and Control
Additional Description
Assign EDID resolution
X2)
and refresh rate to the
MediaPort 200 input.
View assigned EDID resolution
X2)
and refresh rate for the
MediaPort 200 input.
Save HDMI loop output EDID
X2)
to EDID emulation (valid for
X2)
custom EDIDs only ( =201,
202, and 203).
X2)
Export EDID to filename.
X2)
Import EDID from filename
(valid for custom EDIDs only).
Perform an Auto-Image on the
current input (follows current
aspect ratio setting).
Perform an Auto-Image and fill
entire display screen.
Perform an Auto-Image and
follow the input aspect ratio.
Enable HDCP encryption support
for the HDMI input (default).
Disable HDCP encryption support
for the input.
View HDCP authorized status
X6@
for the input. For :
0 = HDCP Authorized is disabled
(encrypted data blocked) (default).
1 = HDCP Authorized is enabled
(encrypted data is allowed).
X6@
53