Extron electronics mediaport 200 User Manual page 63

Command
Output Configuration
USB Output Scaling Rate
Set USB output rate
group
View USB output group
NOTE:
In verbose modes 1 and 3: When the USB output resolution changes automatically by request from the PCS
software, the MediaPort responds with Rate
HDMI Loop Output Format
Set format
View setting
HDCP Mode (HDMI Loop Output)
Set HDCP mode
View setting
X@
NOTE: = Video output type: 1 = USB, 2 = HDMI loop output
X2!
= USB output resolution group: 1 = all (only selection currently available)
X2@
= USB streaming output resolution @ 15 Hz or 30 Hz: 0 = not streaming, 10 through 27 = rates (see the
USB streaming output resolution table
X4%
= HDMI loop output format:
0 = Auto (default) ): HDMI – RGB Full with InfoFrames or audio to a CEA sink or DVI – RGB 444 to a (LCD
screen shows Auto non-CEA sink
1 = DVI (RGB 444, 0-255, no audio, no InfoFrames)
2 = HDMI RGB Full (RGB 444, 0-255, audio, InfoFrames)
3 = HDMI RGB Limited (RGB 444, 16-235, audio, InfoFrames)
4 = HDMI YUV Full (YUV 444, 0-255, audio, InfoFrames)
5 = HDMI YUV Limited (YUV 444, 16-235, audio, InfoFrames)
6 = HDMI YUV Full (YUV 422, 0-255, audio, InfoFrames)
7 = HDMI YUV Limited (YUV 422, 16-235, audio, InfoFrames)
X4^
= HDCP mode:
0 = Continuous HDCP trials to the HDMI sink. 10 seconds of HDCP trials to the DVI sink, then HDCP
halted until HPD or power cycle. Passes encrypted output only when the select input is encrypted.
1 = Continuous HDCP trials to the HDMI sink. 10 seconds of HDCP trials to the DVI sink, then HDCP
halted until HPD or power cycle. Passes encrypted output 100% of the time.
2 = Continuous HDCP trials to the HDMI sink. Continuous HDCP trials to the DVI sink.
Passes encrypted output only when the select input is encrypted.
3 = Continuous HDCP trials to the HDMI sink. Continuous HDCP trials to the DVI sink. Passes encrypted
output 100% of the time.
ASCII Command
(Host to Unit)
E X2! }
RATE
E }
RATE
X2@ ]
(see the
E X4% }
2 * VTPO
E }
2 VTPO
E X4^ }
S HDCP
E }
S HDCP
Response
(Unit to Host)
X2! ]
Rate
X2! X2@ ]
*
With tagged responses
(verbose modes 2 and 3):
X2! X2@ ]
Rate *
verbose mode symbol definitions
X4% ]
Vtpo 2 *
X4% ]
With tagged responses
(verbose modes 2 and 3):
X4% ]
Vtpo
X4^ ]
Hdcp S
X4^ ]
With tagged responses
(verbose modes 2 and 3):
X4^ ]
Hdcp S
on page 49)
MediaPort 200 • Remote Configuration and Control
Additional Description
Select output resolution and
X2!
refresh rate group .
Show selected output rate group
X2!
and current output resolution
X2@
.
on page 50).
Select the format for the HDMI
loop output.
Show HDMI loop output format
X4%
.
X4^
Select HDCP mode for the
HDMI loop output.
X4^
View HDCP mode of the
HDMI loop output.
57